Bambu Lab printers show errors with complex models
29 posts across 2 communities in the last 30 days; 97% from r/3Dprinting.
“Is my printer broken I just bought this Bambu labs mini and I’m printing the benchy but it keeps going side to side then back to the disposal zone. And it’s taking forever to print the benchy. What should I do is it faulty? Should I return it and request a new one?”
“Hello, I'm writing in despair after several print fails. I'm using a Bambu P2S with ObscuraNox2.0 settings on Orca Slicer (see pictures) and PLA Matte. I had a big clogged nozzle that I cleaned and did not manage to save the nozzle (the cleaning needle provided should apply for…”
“Hi everyone, I'm relatively new to 3D printing and could use some advice from those with more experience, especially other Bambu users. I'm trying to print the Merchant Mask from Slay the Spire on a stock Bambu A1 Mini. The mask has been split into multiple pieces to fit the…”
Users are encountering BM0111 errors on Creality Hi printers and funky prints when using the Bambu slicer for complex models. These issues impact print quality and require troubleshooting of printer settings or model design.
SOURCES (40)
“Hi buddies i use bambu lab a2L combo. i print with PLA but everytime i print a multi color object it prints like this. i use a prime tower too. what might i be doing wrong? submitted by /u/Forsaken-Monitor1706 [link] [comments]”
“I've, cleaned the build plate (OEM textured), flipped the build plate, reoriented the model so it's hitting the build plate in a different spot and tried 3 different PLAs and the last one was dried. It fails at the same area which is circled in the pic. For some reason it saves that corner for last and it's laid a different direction than the rest of the first layer but it spaghettis there every time Got the model on makerworld. The pic is of the back side in Bambu studio so first la”
“Hello everyone, Hope you all are doing well. I would like some help here. Im very new to 3D printing, hardly been a week, recently I bought a Bambulab X2D , and today I started getting an error saying "the left hotend cooling fan speed is too slow or stopped. The fan must be stuck or the connector might not be plugged in properly" . Now i have dismantled the fan, removed the connector and put it back , i have checked for anything inside the fan that might be tangled, it was all clean.”
“Hi everyone! I have a new build plate for my Bambu Lab A1, BIQU Glacier. But after using it I started to have issues with layer shifts in PLA. The print was almost finished, but I noticed that it went to the side on the last part. Do you think it's because of the new build plate? Or maybe there is something wrong with the printer? It's been a while since I did any maintenance on it, so maybe that's a reason? Have you guys ever had something like this happen? submitted by”
“**What it is:** a web app for Bambu Lab printer owners. You upload your Bambu Studio .3mf, it checks every object on every plate (tiny details, overhangs, print-in-place joints, flat tops), and gives you a per-plate report of what to change and why, plus a tuned .3mf you can open and print. **Who I'm looking for:** anyone with a Bambu printer (X1, P1, P2, A1, H2) who prints detailed or articulated models and fights heat blobs, ghosting, or fused joints. **What testers get:** Pro free, and yo”
Same as above submitted by /u/Particular_Signal198 [link] [comments]
“Hello everyone, My Bambulab a1 suddenly won’t take any filament . If I load it with the ams lit it dosn‘t automatically feed the filament and if I do it manually it won’t work to. Here is a video of it: submitted by /u/Xilow_ [link] [comments]”
“Is my printer broken I just bought this Bambu labs mini and I’m printing the benchy but it keeps going side to side then back to the disposal zone. And it’s taking forever to print the benchy. What should I do is it faulty? Should I return it and request a new one? submitted by /u/Advanced-Pudding4420 [link] [comments]”
“Hello, I'm writing in despair after several print fails. I'm using a Bambu P2S with ObscuraNox2.0 settings on Orca Slicer (see pictures) and PLA Matte. I had a big clogged nozzle that I cleaned and did not manage to save the nozzle (the cleaning needle provided should apply for 0.4 nozzle as it's clearly impossible to make it work on here). I think it was due to adhesion issues (my plate was probabaly not warm enough so I raised temperature to 65°), washed it and I ordered a new Nozz”
“What setting do I have wrong? I am using 2 printers a Bambu A1 mini and standard A1. Have been getting some lovely prints but don't seem to be able to get some working quite right. Is it the layer settings? Both prints in the image are from the A1 mini. It seems to be a particular group of prints I am trying for BFG (Battle Fleet Gothic from ArcaneEternal). They were going great but suddenly am getting the result on the left with some print line showing and stringy/partial supports. The prin”
“Hi everyone, I'm relatively new to 3D printing and could use some advice from those with more experience, especially other Bambu users. I'm trying to print the Merchant Mask from Slay the Spire on a stock Bambu A1 Mini. The mask has been split into multiple pieces to fit the printer. I'm currently working on one of the smaller arch-shaped sections (the top half of the mask). The issue is that the print repeatedly fails at the exact same location. The failure always occurs on one corn”
“So I currently have the bamboo lab A1 mini with the AMS lite. I’ve tried reaching out to customer service for help because whenever I do any sort of multicolor print, it gives me the same error code that it’s unable to feed the filament. Now I’ve went through every single thing that they have sent me over the past three weeks to see what’s going on with the AMS lite. And to no avail, it’s still not working if I want to do a multicolor print I have to sit next to it and feed the printer the filam”
“Hey Guys, im having this problem with my Bambu lab x2d where I printed a part 3 times and having the same exact fault, the printer is like making lines on roughly the same exact spots, the top print shows this best and i dont know what it coups be, i printed this with 0.2 nozzle on the main nozzle with freshly unboxed and dryed Bambu lab pla matte, i am using the standaard filament profile and an engeneering plate with glue on top of it wich has always been rock solid, any idea what the problem”
“This is a custom design that I drew up. I have to print the front and back pieces on two different plates on my Bambu P1S. This is my third round of printing, and it is always off in the same way, and in the same spots. Notice the huge difference here. My first two used 0.20mm Standard, this one 0.16mm High Quality. I don’t understand how this is repeatedly wrong every time. EDIT: YES the model is square EDIT: If I put them both facing in the same direction, i.e. print bottoms pointing the same”
“A1 bambu, pla plastic, 0.2 standard profile submitted by /u/CoolAmbassador3831 [link] [comments]”
“https://preview.redd.it/t4qbwk3bzfth1.png?width=1347&format=png&auto=webp&s=7fee20397f194137d980e5628a85d1e67ecd3cfb So, I'm trying to config unlayered slicer to print a prop, and i got so far as to generate cut planes but it still slices linearly. Since the community support is pretty limited for trying to print nonlinearly on machines designed for linear slicing, either that or i can't find the right forum, I'm approaching for advice here. I can't find video tutoria”
“Hi everyone, I recently bought a brand-new Bambu Lab A1, and I’m having an issue where the nozzle occasionally makes a scraping/grinding sound against the printed part or the print surface. It does not happen constantly . The printer can print normally for a while, but at certain points during a print, I suddenly hear the nozzle rubbing against the print. It has happened multiple times, even with the same print file. I recorded a video of the sound and attached it to this post. The printer is br”
“help 😩 why do I keep getting blobs in my prints Creality K1 0,4 nozzle PTEG -245c submitted by /u/2MAS_dk [link] [comments]”
“Hello, Using bambu lab a1, creality PLA on 220c, on the default bambu studio settings, with 0.4 nozzle. I get these lines and small dots around the text in the front. I have tried playing with the settings multiple times, every time theres a different problem. They are starting 0.4mm inside the gray layer submitted by /u/Remarkable_Food_138 [link] [comments]”
“bambu lab p1s material is a generic PLA i’m using the bambu lab app. can someone explain to me why this is happening? this is my 2nd attempt and both attempts have resulted in this. i did one run with another color and it turned out fine. submitted by /u/melosteez [link] [comments]”
“Hello, Im using Bambu Lab A1, with bambu slicer, and creality grey pla+. Im printing at default speeds. I never had problems with my printer, and slicing in general. I printed a cosplay arm part which was somewhat complex, but i used sunlu which is better imo. Now, I'm printing a sword with a mouth on it, and when it prints the teeth kn the support, the tip of the teeth dont stick and wobble around by the nozzle which then shoots plastic around. I also hear cracking sound from the extruding”
“I’m still a novice here. I’m trying my first print where I’m having to cut the model into pieces in Bambu Studio. I tried with connectors and used the hexagon option. When I print the side with the female connection it prints with the hexagon filled in instead of it being a hole for the male side. Printer is a P2S. What am I doing wrong? submitted by /u/Pipyoppi [link] [comments]”
“Hi all! I got a Bambu A1 recently and am loving it. The only problem I have had is an abnormal fan speed when I try to use a .2mm nozzle. Specifically the warning tells me it’s a slow fan, and I looked and I did note that the fan was completely off. Nothing appears to be blocking the fan, and it genuinely looks like the nozzle is firmly seated. Does anyone have any thoughts? The printer works perfectly fine with a .4 mm nozzle. I have had about a dozen successful prints with it. (I’m about 9 hou”
“Printer: bambulab X1C w/ ~1k hours in it Material: bambulab pla at standard temps and speeds Software is mostly bambu slicer Ok so, I upgraded to an H2C, and decided to give my X1C that had been printing fantastic to my sister, so she could start making her own models and stuff for the theater she works in. Since I drove it over and installed it, it has had a huge variety of issues. First, it was heat creep, and it would print itself to knocking the fan off. This happened with a ventilation rise”
“After attempting to print with PLA-CF I now get a zaxis homing error, I’m running a K2 Pro and have never had this issue before TIA! submitted by /u/bubba4421 [link] [comments]”
“What is this error ? How to improve printing with PA12(Nylon) ? Printer Bambu Lab H2S submitted by /u/Regular-Radio-3682 [link] [comments]”
“https://preview.redd.it/pqfrj26keiph1.png?width=1136&format=png&auto=webp&s=ed7531ac001a04494b835ef77925cb3dc57f7441 Am i going crazy or would this not print just fine? The blue areas are all clear of any obstacles where they intersect, so it seems to me this would be no issue. Any way to force bambu studio to slice this? submitted by /u/meaqforce1 [link] [comments]”
“Bambu A1 with AMS. How do I fix it? TIA! submitted by /u/toadetteducki [link] [comments]”
“Hey community, I’m looking for help with my Bambu Lab A1 . The extruder clicking sound ("tac-tac" / gear skipping) and severe underextrusion have returned, and I haven't been able to solve it this time. submitted by /u/Lele_5 [link] [comments]”
“(Two pictures attached) I'm trying to print this model on a Bambu X2D via Bambu Studio using Bambu PLA Basic. It's failed twice, sorta in the same way. The first attempt on the left (gray) gave me that AI warning after the figure moved on the plate, but as you can see, it kinda failed way before than that. I made a couple changes (increased plate temp from 55 to 60, added a 6mm outer brim, used a different brown filament) and it failed again after moving on the plate, but again, it was f”
“https://drive.google.com/drive/folders/1EZoVcZq5xga5TOKqdCi4rFoKb_3OSHv4?usp=drive_link this modell keeps fking me up. I printed 4 of those evee evolutions (other models) without any issues. but this one makes me sick. Probably because i made this model with meshy and cleaned this myself with blender. (Cleaning, shaping the stars, coloring) Any Idea what especcially on this print is a no go? I also had issues an almost the same layer 3 times. Between 450 and 470. Any Ideas? submitted by &#”
“I’ve been printing for about a month and a half. Anytime I’m doing a multi colored print with my Bambu A1 + AMS Lite, I’ll get alerts that my filament is jammed between color transitions. I click problem fixed and it will resume until it’s time to for the printer to switch colors again. I’m using default settings on builds available through the Handy app, but adjusting the temperature based on what’s on the spools info tag. Any recommendations on how to remedy this are much appreciated. su”
“Trying to get this straightened out. Around 150k geometry and even with paint fill and detect edge it looks funky in the slicer and then prints horribly. How can I go about fixing this? Just test prints right now in PLA using a P1s submitted by /u/Such_Possibility4980 [link] [comments]”
“Hey there. So in very much need of help. Nearly everything has been replaced on the Creality Hi that can be replaced, but the BM0111 error code still pops up. Is there any help or relief for this? Any in all help would be appreciated submitted by /u/Majestic-Piano-4690 [link] [comments]”