Printers warp parts, requiring tape adjustments
11 posts in the last 30 days, all from r/3Dprinting.
“I've been having issues keeping the corners from pulling up on this print (This isn't the bed I'm printing on). I'm printing on a Creality K2 Plus. It's hyper pla, bed temp at 60C, nozzle at 220C. Inner walls at 300, outer walls at 250. I've added a brim, but the issue is I'm…”
“Hi everyone, I’m running into an issue where the corners on the overhangs keep warping upwards when printing with Polymaker Matte PLA. Here are my printer details and current settings: Printer: Phrozen ARCO Filament: Polymaker Matte PLA Layer Height: 0.12 mm Nozzle Temp…”
“These parts are mean to be straight. And is so strange one is bending but the one to the left is straight? Middle is worst. Any idea why this is happening? I have not part cooling on, to try to get better layer adhesion since its such a large part. The tape is put over a split…”
Users are experiencing warping issues with 3D prints and attempting to resolve them through various methods. One user is seeking alternatives to blue painter's tape for a large print area, while another mentions a split in the printer bed affecting adhesion. A third reports an x/y axis shift causing uneven parts.
SOURCES (13)
“I'm using a stock ender 3 v3 se. All the rest of the details are in the other thread that I think might be useful, but maybe more information is needed? submitted by /u/Shuoven [link] [comments]”
“Hey everyone, hoping for a bit of help here. I have a CR10-Mini that has been going strong for some time now. However, I recently replaced the hotend of the printer, re-leveled the bed, and made sure nothing was loose, and now, when it prints, it seems to be shifting the print (if that makes sense). Any help would be greatly appreciated. submitted by /u/Bigglesworths [link] [comments]”
“I've been having issues keeping the corners from pulling up on this print (This isn't the bed I'm printing on). I'm printing on a Creality K2 Plus. It's hyper pla, bed temp at 60C, nozzle at 220C. Inner walls at 300, outer walls at 250. I've added a brim, but the issue is I'm stretching the bed to its limit. This print stretches over the entire diagonal of the bed, so I can only get the brim to 3mm. I have the fan off on the first layer. It seems to hold pretty well f”
“Maybe its because of the cyan or the new white. Printing on bambu with all settings provided from file but the first layers at 50% speed rest at 100% Edit: Both materials are pla. Edit2: wife said she didn't let the print cool and popped it off while it was hot. ( idk if this helps) submitted by /u/AleksandrJ [link] [comments]”
“Whenever I print something large and flat on my A1 it prints great and then when I pop it off after it cools it’s completely bowed. I’ve double checked the print bed and it’s flat as can be, is there something I can adjust for this or just the nature of 3D of printing. submitted by /u/Jstevens87 [link] [comments]”
“Hi everyone, I’m running into an issue where the corners on the overhangs keep warping upwards when printing with Polymaker Matte PLA. Here are my printer details and current settings: Printer: Phrozen ARCO Filament: Polymaker Matte PLA Layer Height: 0.12 mm Nozzle Temp: 210°C (tried 200°C, but the curling actually got worse) Bed Temp: 60°C Cooling: 100% fan speed Overhang Speed: 25 mm/s Wall Order: Tried both Outer-Inner and Inner-Outer-Inner — no noticeable difference. Calibrations”
“So I am trying to print a Case for a PC and to make it temperature resistant, I went with ABS. But the case has a solid floor and the warping caused by the ABS keeps causing the print to fail. https://preview.redd.it/gul0356pxnrh1.jpg?width=768&format=pjpg&auto=webp&s=25deba184fc974ed091c51dbb28460b3a3e7520d https://preview.redd.it/cyjhcc5qxnrh1.jpg?width=768&format=pjpg&auto=webp&s=2d47968362bf3c5c53be82ff64bc9e0dcf162194 https://preview.redd.it/wtbfzezqxnrh1.jpg?width=7”
“I've seen parts warping from the bed but warping from a support is a first time for me, what can be the reason for this? Edit: I'm printing with PLA+ on a bambu lab a1 submitted by /u/Paxtel_de_Vento [link] [comments]”
“I'm using PETG-CF for a cosplay project. Just a few days ago I printed one of these components well, but last night this happened. It seems like the bottom surface is very warped (it's supposed to be flat and nearly perpendicular to the notch at the top) and looks like the entire thing got misaligned at a certain point where you see the top splitting from the bottom. I'm using a flash forge AD5X, used the auto levelling feature, and printed with a brim which didn't seem to help.”
“was able to print a previous revision fine in pla but am now trying to print a slightly improved version in this "tough pc" it didnt make it very far before warping pulled it up off the bed then got it caught on the nozzle, pushing it out the door onto the floor. i dont have a dedicated filament dryer that goes above 55c but i tried my best to dry it for 18 hours in an air fryer with a dehydrate mode (although it maxxed out at 79c). printing on bambu p1s with the 0.8mm hardened steel n”
“Can anyone give me an idea of what this issue is? I'm using a Neptune Elegoo 3 pro printer. One side of it, the right side, the prints are coming out messed up. I've leveled it several times. I would appreciate your thoughts. Thanks submitted by /u/Boring_Interview_000 [link] [comments]”
“These parts are mean to be straight. And is so strange one is bending but the one to the left is straight? Middle is worst. Any idea why this is happening? I have not part cooling on, to try to get better layer adhesion since its such a large part. The tape is put over a split that happened to the printer resuming printing too high after filament change. going to update the printer firmware after this printer is done to see if it fixes the problem. Thankfull for help! Neptune 3 max, stock hotend”