3D Prints Keep Shifting and Leaving Unexpected Lines
10 posts in the last 90 days, all from r/3Dprinting.
“While printing one end sticks out and bends up, while second still attached. At some point whole print just went off. How do i fix it? Printer: Anycubic Mega S Filament: eSun ABS+ 1,75mm Print settings: -Resolution: 0.2mm -Infill: Tri-Hexagon20% -Head/Plate Temperature…”
“I'm using an elegoo neptune 3 pro, that I've switched to a .2mm nozzle, and using the orcaslicer settings for the neptune 3 pro with a 0.2mm nozzle. This is the elegoo black PLA. This is the 3dbenchy boat, but it gets attached to the nozzle and starts moving around so I hit…”
“Hello everyone , so i have been facing a problem with my 3d printer (bambu lab a1) , i get layer shifts everytime i restart the print after there’s a power cut in the area , it’s very significant and due to this i have faced a lot of issues , like full 24hour prints were wasted…”
Several users are experiencing issues with 3D printing, including print shifts, failures, and unexpected lines on finished products. They're seeking advice on troubleshooting settings and improving print quality.
SOURCES (14)
“While printing one end sticks out and bends up, while second still attached. At some point whole print just went off. How do i fix it? Printer: Anycubic Mega S Filament: eSun ABS+ 1,75mm Print settings: -Resolution: 0.2mm -Infill: Tri-Hexagon20% -Head/Plate Temperature: 250°C/100°C submitted by…”
“I'm using an elegoo neptune 3 pro, that I've switched to a .2mm nozzle, and using the orcaslicer settings for the neptune 3 pro with a 0.2mm nozzle. This is the elegoo black PLA. This is the 3dbenchy boat, but it gets attached to the nozzle and starts moving around so I hit stop. There's a bunch of issues: the first layers are so bad that you can't see the text at the bottom (2nd picture), the layers print on top of it but with random bubbles (1st picture), and of course the weir”
“I'm having some significant issues with two of my printers and don't know what the cause is. we're printing ABS GF. for some reason random lines occur which ruin the print. Attaches a picture or what would cause this? submitted by /u/muddro [link] [comments]”
“Printing a giant bottle cap and the second layer is messing up every time. Tried to arachne, adaptive layer height, slow and cool. Everything. Anybody got some input? Bambu H2D, PLA @ 220 submitted by /u/Big3913 [link] [comments]”
“Hello everyone , so i have been facing a problem with my 3d printer (bambu lab a1) , i get layer shifts everytime i restart the print after there’s a power cut in the area , it’s very significant and due to this i have faced a lot of issues , like full 24hour prints were wasted , ima a student and can’t really bear this cost , pls give a solution 🙏🏼 submitted by /u/MasterLavishness_778 [link] [comments]”
“Hi everyone I am facing the issue in the picture while printing the butt here had a support below it and also the leg had support. My printer is bambu lab A1 with 0.4mm nozzle and printing with layer height of 0.12. Is there any solution to this issue? becuase it is looks bad submitted by /u/bodahm1122 [link] [comments]”
“my print kept shifting, I saw some videos/posts saying that the belt could be loose but how tight should it be and can it even be too tight? submitted by /u/09Lynx [link] [comments]”
“I’ve been printing for a few weeks now with my Bambu Labs X2D I used to use PLA and had no issues whatsoever with it, and now I’m printing in PETG for props and costumes. But it’s like at random it decides to string up and come out bad. I’ve checked for clogs, done calibration tests, nothing seems to be working. It’s like the benchy and calibration cubes come out fine, no issues whatsoever at all, but some other models just string up with supports or structures submitted by /u/MrCone”
“I am using a elegoo carbon and when I test printed my model I had no trouble in the far right corner of the bed. Now I wanna print multiple pieces at once and encounter this problem (look at the image plz). Sorry for black on black. I had cleaned the bed and leveled it too. The end product isn't very thick but when the first layer doesn't stick I don't think it matters much... I would be happy with any and all advice! Other specs: I am using PLA. Temp 210 I suppose (I didn't chan”
“Hey guys, Im using: bambu a1 mini basic PLA 0.4 mm nozzle (image) I printed this model using 0.4 mm, it took few tries and setting adjustments (and hell with supports) but i got it. But when i try to use 0.2 mm nozzle model seems to break off of print bed at half point (where characters hair ends) and all i get is half way print, with good old PLA spaghetti on top. Mind you parts that actually make it (bottom half) is incredible in details. Im asking: 1) Is there any way i can make it stronger s”
“My p2s keeps giving me errors. The extrusion motor is overloaded. But it’s the print nozzle gets knocked off alignment. I push the nozzle a little out the cover back on and it works for an other 5-10 mins then does it again. submitted by /u/TaxXposure [link] [comments]”
“I got my bambu lab a1 mini a couple of weeks ago and have been happily printing away, this is the first time I have had something like this happen. Any theories on only a couple of supports would fail? Using white Inland brand PLA submitted by /u/Zolomon423 [link] [comments]”
“Ive tried 2 times, and the printer keeps knocking over peices and failing the print. Im using an elegoo cc2 are there any settings i can change in the slicer to make this work? submitted by /u/Candid-Personality37 [link] [comments]”
“Every time I print this model (case for some books) this slightly sagged out line appears near the bottom of the print. It doesn’t appear on the other half behind it(model cut in half due to size) PLA Black - Siddament brand using Siddaments PLA settings. Bambu P2S submitted by /u/Consistency [link] [comments]”